How to Clean a Car Engine Room

Car And Vehicles Review- How to Clean a Car Engine Room, Most people will just take care of the exterior and interior of the car, but it turns out there is one of the most important parts and usually escape the attention of many people that the engine room. whereas in this sector is very prone to problems due to some parts may be exposed to water during washing. 

If this section rarely get the attention it can be very fatal consequences that interfere with the comfort of the rider, other than water turns dust could also be other factors that lead to engine damage. For example, just dust off the cylinder block section there will be a buildup so that when the oil seeps go undetected because of the clogged by dirt. 

If the engine room in the car frequently checking the many benefits that can be obtained because in addition to being clean if there are any damaged components can also find out tips. Cleaning the engine room should not be taken to the repair shop, because you could also clean up after herself only by 1 hour. Here are the steps to clean cars effective engine room: 

- Prepare some materials such as dish washing detergent, toothbrush, brush, clean cloth and a chamois cloth and kerosene that will be used to clean stubborn crust in aluminum or iron. 

- Flush the engine crankcase and cylinder block under the water, then clean with a toothbrush and brush on stubborn parts. After that, flush with detergent repeatedly scrubbed with a toothbrush while repeatedly until clean, then rinse with clean water. Do not forget to check the oil if there is a leak or not. 

- Meanwhile, the plastic section simply wipe with a chamois cloth and detergent and rinse thoroughly and dry using a clean cloth. 

Meanwhile, to clean the air conditioning and engine cooling should slowly so grating on Consedor not damaged, if there is enough remove the dust gently with a toothbrush. 

Do not forget to also clean the rubber-rubber parts such as air filter and radiator section using detergents to clean and dry in the shade. While waiting for the rubber to dry also check whether the fastening clamp loose or rusty.